Setting Memory Switches - Brother BE-438D Instruction Manual

6-2. Setting memory switches

1
All indicators switch off
2
If you would like to display only the numbers of
memory switches that have been changed from default
settings
3
Ending setting mode
• If you would like to return the setting for a single memory switch to the default setting, press the RESET key
while the number for that memory switch is displayed.
• To return the settings for all memory switches to the default settings, keep pressing the RESET key for two
or more seconds until the buzzer makes a long beep.
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
Menu indicators switch off
TEST indicator lights
TEST indicator switches off
KE-430D, BE-438D
While pressing the SELECT key, turn on the power switch.
* Keep pressing the SELECT key until the model name is
displayed and the buzzer beeps once.
Or
With the power turned on, press the TEST key and the
TENSION/WIND key simultaneously.
• The memory switch number will appear in the
PROGRAM No. display, and its setting value will appear
in the menu display.
Press the or key to select the memory switch
number.
Press the or key to change the setting value.
While pressing the SELECT key, press the
• The numbers of memory switches that have been
changed from default settings will appear in order.
• If no memory switches have been changed from their
default settings, the display will not change and the
buzzer will beep twice.
Press the TEST key.
• The changes will be memorized and the sewing machine
will switch to home position detection standby.
4421Q
4449Q
4451Q
or key.
4452Q
38