Annual Maintenance; Storage - MSA General Monitors FL500 UV/IR Operating Manual

5.3

Annual Maintenance

Make sure that all wiring and terminal connections are connected correctly.
Make sure that the mounting for all integral safety equipment, including but not limited to following
components, is stable:
• Power supplies
• Control modules
• Field detection devices
• Signaling devices
• Accessories connected to field and signaling devices
6

Storage

WARNING!
Keep the device safe from vibration and mechanical shock, which can cause damage.
Failure to obey this warning can result in serious injury or death.
Keep the device in a clean area with an ambient temperature of -40°F to 185°F (-40°C to 85°C) and
a humidity range of 0% to 95% RH noncondensing.
For extended storage, do the following:
(1) If possible, keep the device in the mold as shipped by the manufacturer.
(2) Install the red dust caps in the cable entry holes.
(3) Seal the device and a desiccant in a plastic bag.
(4) Seal the plastic bag inside another plastic bag.
FL500 UV/IR, FL500-H Flame Detector
2
Storage
US
33