Management Options - Lenovo ThinkAgile HX1321 Series User Manual

The following table lists the important information for the system board, heat sink, and processor.
System board Heat sink
installed
installed
System board Small size heat
with large lift sink
handle or system
board with small
lift handle
System board Large size heat
with small lift sink
handle

Management options

Multiple management interfaces are available for managing your ThinkAgile HX1321, and HX3321 Series
appliance.
Lenovo XClarity Administrator
Lenovo XClarity Administrator is a centralized, resource-management solution that simplifies infrastructure
management, speeds responses, and enhances the availability of Lenovo server systems and solutions. It
runs as a virtual appliance that automates discovery, inventory, tracking, monitoring, and provisioning for
server, network, and storage hardware in a secure environment.
Lenovo XClarity Administrator provides a central interface to perform the following functions for all managed
endpoints:
• Manage and monitor hardware. Lenovo XClarity Administrator provides agent-free hardware
management. It can automatically discover manageable endpoints, including server, network, and storage
hardware. Inventory data is collected for managed endpoints for an at-a-glance view of the managed
hardware inventory and status.
10
User Guide for ThinkAgile HX1321 Node ThinkAgile HX3321 Node
Important information
For server models installed with Intel Xeon 6144, 6146, 6154, 8168, 8180,
and 8180M processors, the following parts are not supported:
• Front backplane and front hot-swap SAS/SATA/NVMe drives
• Rear hot-swap drive assembly
• RAID super capacitor module on the bottom of the air baffle
• NVMe PCIe flash adapter
• GPU
• For server models installed with large size heat sink, the air baffle and the
RAID super capacitor module on the bottom of the air baffle are not
supported.
• For server models installed with Intel Xeon 6144, 6146, 8168, 8180, and
8180M processors, ensure that the following configuration requirements
are met:
– The backplane for ten 2.5-inch NVMe drives is not installed.
– No system fan is failed.
– Rear hot-swap drive assembly is not installed.
– NVMe PCIe flash adapter is not installed.
– GPU is not installed.
• For server models installed with the backplane for ten 2.5-inch SAS/
SATA/NVMe drives, Intel Xeon 6154 processor is supported with the
condition that the following configuration requirements are met:
– No system fan is failed.
– Only four SAS/SATA/NVMe drives are installed in drive bays 6–9.
– Rear hot-swap drive assembly is not installed.
– NVMe PCIe flash adapter is not installed.
– GPU is not installed.