Vlan Settings - ZyXEL Communications XGS1250-12 User Manual

9.2 VLAN Settings

Use this screen to view and configure VLAN settings for the Switch. Click VLAN in the navigation panel to
open the following screen.
Note: You could block yourself (and all others) from managing the Switch if you remove all
ports from VLAN1 and you do not configure other VLAN groups. In case this happens,
reset the Switch to the default settings (see
information).
Figure 34 VLAN
The following table describes the labels in this screen.
Table 12 VLAN
LABEL
PVID
Port
PVID
Apply
Chapter 9 VLAN
DESCRIPTION
This field displays the port number.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so
that the frames are forwarded to the VLAN group that the tag defines.
Enter a number between 1 and 4094 as the port VLAN ID.
Click this button to save your PVID settings to the Switch.
XGS1210-12 / XGS1250-12 User's Guide
Section 4.5 on page 29
46
for more