Advertisement
SPARK PLUG
Once the engine has cooled, remove the spark plug and clean with a wire brush. Using a feeler gauge, set
the gap to (0.7-0.8mm) or (0.028-0.031"). Refit the spark plug taking care not to over tighten.
AIR FILTER
Unclip the air filter cover and remove the sponge filter element. To avoid objects falling into the air intake,
replace the air filter cover.
DRAINING THE FUEL TANK AND CARBURETOR
Place an approved petrol container below the carburetor, and use a funnel to avoid spilling fuel.
Remove the drain bolt and then move the fuel valve lever to the ON position.
After all the fuel has drained into the container, reinstall the drain bolt and washer. Tighten the drain bolt
securely.
Air Filter Cover
Air Filter
Float
Bowl
Drain Bolt
Advertisement
