Computer Requirements; Using A Usb Cable To Connect Brother Machine To Pc (Using Windows ® 98 Only) - Brother IntelliFax-4750 Software Manual

Computer Requirements

The following are the minimum computer requirements you need to set up
and operate the MFC as a printer.
CPU
RAM
Hard Disk Drive
Operating System
Use only a shield interface cable that is IEEE-1284 compliant, and that is
less than 6 feet long (1.8 meters), or a USB cable.
Using a USB Cable to Connect
Brother Machine to PC
(Using Windows
Please find your Windows
A USB cable is not included with your Brother machine, Before you can
set up the USB interface, you must purchase a standard USB cable. Or, if
you prefer to set up the bundled parallel cable, please see "Connecting
Brother Machine to PC Using Bundled Parallel Cable".
1
After you have set up the MFC and checked that it is working properly,
make sure your MFC is turned on and your PC is turned off.
2 - 2
S E T U P B R O T H E R M A C H I N E W I T H P C
80486/66MHz or higher (Windows
Pentium 75 or Higher (Windows
®
Windows NT Workstation Version 4.0)
8MB or greater for Windows
8MB or greater for Windows
(16MB recommended)
16MB or greater for Windows
Workstation Version 4.0 (32MB recommended)
50MB Available Disk Space
®
Windows 3.1x, 95/98 or NT
4.0, DOS environment compatible with your
®
Windows version
®
98 Only)
®
98 CD-ROM before you begin.
®
3.1x or 95/98)
®
98 or
®
3.1x
®
95
®
98 or Windows NT
®
Workstation Version
®