First Startup Configuration - Simrad RS40 User Manual

First startup configuration

The first time the radio is powered up, the user is prompted to make
a series of setting selections in order to allow the radio to perform to
its full potential. Some steps must be completed; some are optional
and can be completed later.
Press DSC/MENU button to move the cursor 1 digit to the left; press
TRI button to skip this screen and move to the next; press X button
to go back one screen.
The steps are outlined below for reference:
1.
Select the country and region the radio will be operated in:
2.
Enter MMSI number if known, or skip to next step. Re-enter number
to confirm correct entry:
¼ Note:
MMSI entry can only be done once. Changing the MMSI
requires radio be returned to a Simrad dealer.
3.
If you have selected the Country mode to be EU, some EU regions
require you to setup ATIS. Enter the ATIS ID number. Re-enter
number to confirm correct entry:
4.
Enter vessel call sign if known, or skip to next step (maximum 7
digits):
Installation | RS40/RS40-B User Guide
| 61