Simrad RS40 User Manual page 16

16 |
A typical display:
3
6
4
8
23
21
1.
Channel is set to high power transmit
2.
Missed call in the DSC call log
3.
Channel is busy
4.
Volume is under active control (solid black indicates control is active)
5.
Current channel saved in 'My Channels'
6.
Track your buddy is enabled
7.
Current channel will be skipped during a scan
8.
Volume level indicator
9.
Time (derived from GPS) - UTC offset is applied
10.
Latitude/Longitude
11.
Squelch level indicator (greyed out means control is not active)
12.
Channel number (2 or 4 digits)
13.
The USA channel bank is active
14.
DSC functionality is enabled, but autoswitch is off
15.
Weather alert function is enabled
16.
Internal GPS is enabled, with 3D fix
17.
AIS receiver is enabled
18.
Low vessel voltage alert
19.
Sensitivity mode is set to LOCAL
20.
Current channel is Duplex
21.
GPS Simulate mode is active
22.
Current channel is set as the Weather channel (use Wx key to select)
23.
Current channel is set as the Watch channel (use TRI key to select)
24.
MOB waypoint is active.
General Information |
2 1 18 15 19 17 16 14 13
9 22 20
RS40/RS40-B User Guide
24
12
11
10
5
7