Pontiac 1993 Sunbird Owner's Manual page 96

u - u
1MFM Stereo Radio
The digital display indicates information
In time or radio station frequency, the
IM or FM radio band, whether the
Itation is in stereo, and other radio
unctions.
)N/OFF: Press to turn the radio on
md off when your ignition is on.
VOL (Volume): Press the left of this
wtton to decrease the volume, or the
ight to increase it. The volume level
d l be displayed on the screen.
WNE: Press the left of this button to
nanually tune in radio stations lower
In the AM or FM band, or the right to
lune in stations higher on the
AM
or
FM band.
AM/FM: Press this button to change
between the
AM
and FM bands.
RCL (Recall): Press this to change
between the clock and radio station
frequency on the display. With the
ignition off, you can press RCL to see
the time displayed.
BAL (Balance): Adjusts the left/right
and front/rear speaker balance to your
individual taste. ,When you change
either adjustment, the bottom of the
digital screen will display the point of
balance you have selected. For the
normal setting preset at the factory,
press the left and right of the balance
control at the same time.
TREB (Treble): Press the left of this
button to decrease treble, or the right to
increase it. For the normal setting
preset at the factory, press the center of
the button.
BASS: Press the left of this button to
decrease bass, or the right to increase it.
For the normal setting preset at the
factory, press the center of the button.
SCAN: Press to listen for
a few seconds
to the next station on the AM or FM
band; the scan will continue every few
seconds until you press SCAN or RCL
again to stop on a particular station.
SEEK: Each time you press SEEK, you
will tune in the next station on the AM
or FM radio band.
To Preset Radio Stations:
The five pushbuttons under the digital
display can be used to preset up to 10
radio stations (five AM and five FM
radio stations).
1. Tune in the desired station.
2.
Press SET. The SET indicator will
appear on the digital screen for five
seconds.
3 . While the SET indicator is displayed,
press one of the five pushbuttons.
Whenever you press this button again,
the preset station will be tuned in.
4.
Repeat steps
1-3
for each of five AM
and five FM stations.