Pontiac 1993 Sunbird Owner's Manual page 31

Seats Restraint Systems
Your dealer can obtain the hardware kit
and install it for you, r r you may install
it yourself using the ir,;tructions
provided in the kit.
Use the tether hardware kit available
from the dealer. The hardware and
installation instructions were
specifically designed for this vehicle.
Securing a Child Restraint in a
Rear Outside Position
You'll be using the lap-shoulder belt.
See the earlier section about the top
strap if the child restraint has one.
1.
Put the restraint on the seat. Follow
the instructions for the child
restraint.
2.
Secure the child in the child restraint
as the instructions say.
3. Pick up the latch plate, and run the
lap and shoulder portions of the
vehicle's safety belt through or
around the restraint. The child
restraint instructions will show you
how. Tilt the latch plate to adjust the
belt if needed. If the shoulder belt
goes in front of the child's face or
neck, put it behind the child restraint
4.
Buckle the belt. Make sure the
release button is positioned so you
would be able to unbuckle the safety
belt quicltly if you ever had to.