Adding Luns - Texas Memory Systems RamSan-120 User Manual

6.2 Adding LUNs

The RamSan allows the administrator to add LUNs through the Text
Management Interface and the web interface.
6.2.1 Via Web Interface
To add LUN(s) via the web interface:
•
•
•
•
•
•
•
•
•
•
•
RamSan-120 User's Manual
Click on the "Management Control Processor" graphic
Click on the "LUN Config" tab
Click the "New LUN" button
Select a "LUN number" from the drop-down box
Enter the "Device ID" (used only as an OpenVMS specific
device identifier)
Adjust the "LUN size" using the scroll bar
Assign links to FC ports (see Section 6.3 – Linking LUNs to/from
Fibre Channel Controllers)
Assign LUN masks (see Section 6.7 – Managing Access Lists)
Set backup mode (see Section 6.9 – Setting Backup Mode)
Click the "OK" button
The system adds the specified LUN.
Figure 6-3: Adding LUNs via the Web Interface
- 59 -