Table of Contents
Advertisement
4.3.3 Configuring Ethernet settings via Text Management Interface
•
•
The system displays the "Ethernet Setup" screen, as shown in
Figure 4-8: Ethernet Setup.
To change to IP assignment mode:
•
•
•
If the administrator sets the IP assignment mode to "Static," the
'Change IP address', 'Change subnet mask', and 'Change gateway'
options appear, as shown in Figure 4-9: Static IP Settings:
RamSan-120 User's Manual
From the Telnet Main Menu, select "Management setup"
Select "Configure Ethernet"
Figure 4-8: Ethernet Setup
Select "IP assignment mode"
Select the appropriate assignment mode from the submenu
If you choose "DHCP" or "Disable Ethernet," then select
"Save changes, restart the network, and Exit"
Figure 4-9: Static IP Settings
- 29 -
Advertisement
Table of Contents
