To change the system location:
•
•
To change the system contact name:
•
•
All modifications are visible at the top of the menu.
To save any changes:
•
Via Web Management
To update community information via the Web Management
Interface:
•
•
•
•
RamSan-120 User's Manual
Select "Change the system location"
Enter the system location and press [ENTER]
Select "Change the system contact"
Enter the system contact and press [ENTER]
Select "Save changes and exit"
Click on the "Management Control Processor" graphic.
Click on the "SNMP" tab.
Enter the appropriate community values.
Click the "Save" button.
Figure 8-2: SNMP configuration screen
- 83 -