Configuring System Date And Time - Texas Memory Systems RamSan-120 User Manual

4.2 Configuring System Date and Time

The RamSan uses the system date and time to update the event log. This
feature aids in troubleshooting.
4.2.1 Set Date and Time
Via Web Interface
To change the system date and time via the web interface:
•
•
•
•
The system immediately changes the date and time. The new time
appears next to "Current time/date."
RamSan-120 User's Manual
Click on the "Management Control Processor" graphic
Click the "General Config" tab
Enter the date and time under the "New time/date" field.
Click the "Save" button
Figure 4-5: Date/Time Change via Web Management Interface
- 23 -