Table of Contents
Advertisement
Via Text Management
To change the administrator password via Text Management
Interface:
•
•
•
If you are not logged in through the console, you must verify your
password. For security reasons, the system does not display the
typed letters when typing in passwords.
4.1.3 Enable/disable Telnet
The system allows the administrator to disable Telnet to prevent
users from accessing the system through Telnet.
Note:
The RamSan does not allow you to disable access to the console.
This provides a method to re-enable the Telnet, Web, and SNMP.
RamSan-120 User's Manual
From the Telnet Main Menu, select "Management setup"
Select "Change password"
Enter the admin password and press [ENTER]
Figure 4-2: Password Change
- 19 -
Advertisement
Table of Contents
