6.2 Adding LUNs
The RamSan allows the administrator to add LUNs through the Text
Management Interface and the web interface.
6.2.1 Via Web Interface
To add LUN(s) via the web interface:
•
•
•
•
•
•
•
•
•
•
RamSan-300/320 User's Manual
Click on the "Management Control Processor" graphic
Click on the "LUN Config" tab
Click the "New LUN" button
Select a "LUN number" from the drop-down box
Adjust the "LUN size" using the scroll bar
Assign links to FC ports (see Section 6.4 – Linking LUNs to/from
Fibre Channel Controllers)
Assign LUN masks (see Section 6.7 – Managing access lists)
Set backup mode (see Section 6.9 – Setting backup mode)
Click the "OK" button
The system adds the specified LUN.
Figure 6-3: Adding LUNs via the Web Interface
- 54 -