Oldsmobile 1995 88 Owner's Manual page 148

;tape player, press and hold EJECT for five seconds to
reset the Cln indicator. The radio will display
"---"
to
$how that the clean feature has been reset.
If
E and a number appears on the display at any time, an
error has occurred. See "Cassette Tape and CD Errors"
later in this section.
NR: This radio has Dolby@B Noise Reduction to reduce
background noise on Dolby B encoded tapes. When
playing a cassette tape, press this button to reduce
background noise on your tape. The Dolby symbol will
appear in the display. Dolby Noise Reduction
is
manufactured under license from Dolby Laboratories
Licensing Corporation. Dolby@ and the
00
symbol are
trademarks of Dolby Laboratories Licensing Corporation.
A
SEEK
v:
When you press SEEK while playing a tape,
it will search for the next higher or lower selection and
stop.
SCAN: When you press SCAN while playing a tape,
you'll hear the first few seconds of each selection. Press
SCAN again
to
stop on a selection. The tape will be muted
while scanning and
SCAN
will appear on the display.
FWD: Press
FWD
(fast forward) to advance a cassette
tape rapidly; press again to play the tape.
REV: Press REV (reverse) to reverse a cassette tape
rapidly; press again to play the tape.
PROG: Press PROG (program) to play the other side of
the tape.
TAPE/CD: If you have a tape inserted and the radio is
playing, press TAPE/CD to play your tape. To return to
the radio while the tape is playing, press AMEM. You
can also press TAPE/CD to change between a tape and
a
compact disc if both are inserted. The inactive tape or CD
will remain safely inside the radio for future listening.
EJECT Press to eject the cassette tape. The radio will
then play.
Playing a Compact Disc
The CD player will play either normal-size discs or the
smaller 8 cm discs without an adapter.
With the ignition on, insert the disc partway into the
slot, with the label side up. The player should pull it in
and it will begin playing.
Note that when the disc is inserted, CD will be
displayed. When the disc is playing, CD with a box
around it will be displayed. If you select a TONE setting
for your CD, it will be activated each time you play a
CD.
As each new track starts to play, the track number will
appear in the display.
3-20