Oldsmobile 1995 88 Owner's Manual page 147

selected a tone setting for a tape or CD, then play the
radio, the tone you set for the tape or CD will be
reactivated when a tape or CD is played again.
BASS: Press this button lightly to release it from the
recessed position. Turn it to adjust bass response. As
you turn the knob you will feel the center position. Push
the knob back in to return it to the recessed position.
Turning BASS will change the radio's Automatic Tone
Control feature to MANUAL.
TREB: Press the treble button lightly to release it from
the recessed position, then pull it out to its fully
extended position. Turn it to adjust treble response. As
you turn the knob you will feel the center position. Push
the knob back in to return it to the recessed position.
Turning TREB will change the radio's Automatic Tone
Control feature to MANUAL.
BAL: Press the balance button lightly to release it from
the recessed position. Turn it to adjust the right and left
speaker balance. As you turn the knob you will feel the
center position. Push the knob back in to return it to the
recessed position.
FADE: Press this button lightly to release
it
from the
recessed position, then pull it out to its fully extended
position. Turn it to the right to increase front speaker
volume. Turn
it
to the left to increase rear speaker
volume. As you turn the knob you will feel the center
position. Push the knob back in to return it to the
recessed position.
To Play a Cassette Tape
With the ignition on, insert the tape and it will begin
playing. The audio system will turn on automatically.
Your tape player is designed to work best with tapes tha
are 30 to 45 minutes long on each side. Longer tapes
may not work as well.
Note that when a tape is inserted, TP will be displayed.
When the tape is played, TP with a box around it, will
be displayed along with an arrow to show whether the
top or bottom of the tape is playing. Any time a tape is
inserted, the top side will play first. If a high bias metal
or CrO2 tape is played, HI-BIAS will appear in the
display and the equalization will be adjusted
automatically. If you select a tone setting for your tape,
it will be activated each time you play a tape.
If Cln (clean) appears on the display when you insert
your cassette tape, your cassette player needs to be
cleaned. It will still play cassette tapes, but it should be
cleaned to prevent damage to your cassette tapes and the
cassette tape player. See "Cassette Tape Player Care"
later in this section. After you have cleaned the cassette
3-19