FEATURES
(a) i3s (Idle stop start system)
Starting & Warm up the engine:
Keep the i3s switch (1) to "OFF" position.
•
Turn the ignition key to "ON" ( ) position.
•
The i3s indicator (2) will glow on the
•
speedometer console for 2 seconds and
turn "OFF".
1
(1) i3s switch
Start the engine and let it idle for 2-3
•
minutes.
2
(2) i3s indicator
The engine will stall if the i3s switch is in
•
"ON" position during warm up.
Use choke during cold conditions.
•
Initial activation of the i3s system:
Keep the i3s switch (1) to "ON" position.
•
Turn the ignition key to "ON" ( ) position.
•
The i3s indicator (2) on the speedometer
•
console will glow for 2 seconds and turns
"OFF".
Put the vehicle in stand still condition on its
•
main stand (Speedometer pointer is on 0
Km/h).
Start the engine and allow it to run at idle
•
r/min.
Ensure that the r/min should not cross
2000.
The engine will turn off in 30±1 secs. After
•
the first stop start, every subsequent stop will
be in 5±1 secs.
In this condition, the engine can be restarted
•
either with brake & slight throttle, brake
& electric start or kick.
If for the first time vehicle is started and rider
•
crosses 11km/h speed. After that, vehicle is
kept in idle (Speedometer pointer is on 0
Km/h) then the engine will be turned "OFF"
in 5±1 seconds.
To re-start the vehicle with i3s switch in
•
"ON" position, apply brake & slight throttle.
Vehicle will not start with sudden throttle.
27
NOTE
NOTE