PRO Power Switchgear Constant Current Regulator, FAA L-828/L-829
10.1
L-829 Setup and Calibration
IMPORTANT
10.1.1
Lamp-Out Monitor
The lamp out monitor will provide alarm indications when a user specified number of lamps have failed.
This type of monitoring is only accurate given the following:
1) All lamps on the circuit must be of the same type and wattage.
2) All isolation transformers must be the same wattage and manufacturer.
Instruction Manual
Series 82_SGSPR-480- _ _ - _ - _
Figure 37: L-829 Menu Tree
Before entering setup data for L-829 functions, disable both LAMP
COUNT MODE and PERCENT MODE. This will prevent false
alarm indications during setup.
WARNING:
56
DOCUMENT 1222
REV. A