Jeep 2007 Grand Cherokee Series Owner's Manual page 335

Hold down N (Neutral) "pin" switch (with a pen, etc.) for
4 seconds until the LED lamp by the switch starts to blink
indicating shift in progress. Lamp will stop blinking (go
out) when shift is complete. The "4WD SYSTEM IN
NEUTRAL" message will no longer be displayed on the
EVIC (Electronic Vehicle Information Center). Refer to
"Electronic Vehicle Information Center (EVIC)" in Sec-
tion 4 of this manual. (See page 183 for more informa-
tion.)
STARTING AND OPERATING 335
Neutral Switch
5. Shift transmission into P (Park).
6. Start the engine.
7. Shift transmission into D (Drive).
5