Setting Memory Positions And Linking Remote; Keyless Entry Transmitter To Memory - Jeep 2007 Grand Cherokee Series Owner's Manual

Keyless Entry transmitters can also be programmed to
recall the same positions when the "Unlock" button is
pressed.
Driver Memory Switches
Your vehicle may have been delivered with two Remote
Keyless Entry transmitters. One or both transmitters can
be linked to either memory position. The memory system
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107
can accommodate up to four transmitters, each one
linked to either of the two memory positions.

Setting Memory Positions and Linking Remote

Keyless Entry Transmitter to Memory

NOTE: Each time the SET (S) button and a numbered
button (1 or 2) are pressed, you erase the memory settings
for that button and store a new one.
1. Insert the ignition key and turn the ignition switch to
the ON position.
2. Press the driver door memory button number 1 if you
are setting the memory for driver 1, or button number 2
if you are setting the memory for driver 2. The system
will recall any stored settings. Wait for the system to
complete the memory recall before continuing to step 3.
3. Adjust the driver's seat, recliner, and driver's side
view mirror to the desired positions.
3