Jeep 2007 Grand Cherokee Series Owner's Manual page 259

In high ambient temperatures with sustained high engine
speed and load, an upshift followed shortly thereafter by
a downshift may occur. This is a normal part of the
overheat protection strategy when operating in the
"Tow/Haul" mode.
The transmission will downshift from Overdrive to the
most desirable gear if the accelerator pedal is fully
depressed at vehicle speeds above approximately 35 mph
(56 km/h).
When To Use "TOW/HAUL" Mode — If Equipped
When driving in hilly areas, towing a trailer, carrying a
heavy load, etc., and frequent transmission shifting oc-
curs, press the "TOW/HAUL" button. This will improve
performance and reduce the potential for transmission
overheating or failure due to excessive shifting. When
operating in "TOW/HAUL" mode, the transmission will
shift to direct gear and Overdrive will be enabled under
steady cruise conditions.
STARTING AND OPERATING 259
Tow/Haul Button
The "TOW/HAUL" light will illuminate in the instru-
ment cluster to indicate when the switch has been
activated. Pressing the switch a second time restores
normal operation. If the "TOW/HAUL" mode is desired,
the switch must be pressed each time the engine is
started.
5