Table of Contents
Advertisement
2.2.4 Ceiling and floor preparation.
Attach plusnut on these 5 holes.
NOTE: Enlarge these holes if the plusnuts don't fit, using 3/8" drill bit or step drill.
Remove plastic caps and the two D-rings from vehicle floor, then verify if
the threads are in good condition.
For technical support, contact us at 1-800-565-5321
TOOLS
q Plusnut Tool
HARDWARE USED
5×
# 94-130
Plusnut .250
TOOLS
q Cordless Impact
q T40 Torque Bit
C10-PC Installation Guide | REV. D1 | Page 11
Advertisement
Table of Contents
