Checking Drive Belts - Hyundai 2003 Santa Fe Owner's Manual

G170A01A-AAT
CHECKING BRAKE PEDAL
FREE-PLAY
0.12 ~ 0.31 in.
(3 ~ 8 mm)
With the engine off, press down on the brake
pedal several times to reduce the vacuum in the
brake booster.
Then, using your hand, press down slowly on
the brake pedal until you feel a change in
resistance. This is the brake pedal free-play.
The free-play should be within the limits speci-
fied in the illustration above. If it is not, have it
inspected by your Hyundai dealer and adjusted
or repaired if necessary.
G180A01A-AAT
CHECKING BRAKE PEDAL
CLEARANCE
HXGS508
You need a helper to check the brake pedal
clearance. With the engine running, have your
helper press down on the brake pedal several
times and then hold it down with a force of about
110 lbs (50 kg, 490 N). The brake pedal clear-
ance is the distance from the top surface of the
brake pedal to the asphalt sheeting under the
floor mat.
If the brake pedal clearance is not within the
limits specified in the illustration, have it in-
spected by your Hyundai dealer and adjusted
or repaired if necessary.
G190A01A-AAT

CHECKING DRIVE BELTS

Auto tensioner
2.95 in. (75 mm)
Generator
G180A01L
3.5 V6
Power steering pulley
Crank shaft apulley
DO-IT-YOURSELF MAINTENANCE
2.7 V6 2.4 DOHC
Power steering
Power steering
Eng.coolant
0.30~0.48 in. 0.24~0.35 in.
Generator
0.315 in.
COMP
Eng.pulley Eng.pulley
Generator
A/C pulley
6- 19
COMP
HSM396
G140D02L