Checking Drive Belts - Hyundai H-1 2005 Owner's Manual

8
DO-IT YOURSELF MAINTENANCE
22
G170A01A-GAT
Brake Pedal
3 ~ 8 mm
(0.12 ~ 0.31 in.)
G160A01E
With the engine off, press down on
the brake pedal several times to re-
duce the vacuum in the brake booster.
Then, using your hand, press down
slowly on the brake pedal until you
feel a change in resistance. This is
the brake pedal freeplay. The freeplay
should be within the limits specified in
the illustration. If it is not, have it
inspected by your Hyundai dealer and
adjusted or repaired if necessary.
G180A01A-GAT
CHECKING BRAKE PEDAL
CLEARANCE
45.1 mm
(1.78 in.)
G180A01L
You need a helper to check the brake
pedal clearance. With the engine run-
ning, have your helper press down on
the brake pedal several times and
then hold it down with a force of about
490N (50 kg, 110 lbs). The brake
pedal clearance is the distance from
the top surface of the brake pedal to
the asphalt sheeting under the floor
mat. If the brake pedal clearance is
not within the limits specified in the
illustration, have it inspected by your
Hyundai dealer and adjusted or re-
paired if necessary.

CHECKING DRIVE BELTS

G190A01P-GAT
Power steering pulley
Gasoline
Auto
tensioner
pulley
COMP.pulley
Generator
pulley
HSM396-1
Engine pulley
Diesel (2.5 TCI) Diesel (2.5 CRDi)
Generator pulley
Power steering pulley
Idler pulley
Water pump pulley
Water pump pulley
Tension
Idler pulley
pulley
COMP.
pulley
Auto
Crankshaft
tensioner
Idler pulley
pulley
Power
Crankshaft
Generator COMP.
steering
pulley
pulley pulley
pulley
G190D01P-1