Laundrylux CROSSOVER 2.0 Series Training Manual page 64

6. The disassembly process is similar for the bottom-control machine, except instead of removing
the control panel remove the two screws from the front top blank panel and demount the panel
7. Swap the TOP panels between the top-and-bottom-control machines
8. Adjust the feet on the Top Control machine, to level it according to the intended installation
position and remove the drum contents from the bottom-control dryer.
9. Flatten a machine carton, and tilt the bottom-control dryer on one of its sides on the carton
10. From the bottom control machine, remove the rectangular knock-out plate, as indicated in the
picture using a hammer and screw driver.
11. Also, remove the four leveling legs from the base panel of the machine.
After swapping the TOP panels
Leveling Legs