Related Manuals for Laundrylux WHLFP817M
Summary of Contents for Laundrylux WHLFP817M
- Page 1 MODEL NO. WHLFP817M WHLFP817MI W A S H E R O P E R A T I N G M A N U A L DOC. NO. 098030 EDITION 21.2018...
- Page 2 Intentionally blank...
- Page 3 Operating Manual WHLFP817M WHLFP817MI WARNING: ALL OPERATING AND MAINTENANCE PROCEDURES SHOWN IN THIS MANUAL MUST BE FOLLOWED DAILY FOR PROPER OPERATION OF YOUR MACHINE. PLEASE ENTER THE FOLLOWING INFORMATION AS IT APPEARS ON THE MACHINE(S) DATA PLATE(S). MACHINE MODEL MACHINE SERIAL NUMBER(S)
- Page 4 Intentionally blank...
- Page 5 SAFETY AND WARNINGS SIGNS Replace If Missing Or Illegible LOCATED ON THE FRONT OF THE DETERGENT DRAWER: LOCATED AT THE REAR OF THE MACHINE: LOCATED NEXT TO DOOR:...
- Page 6 SAFETY AND WARNINGS SIGNS WARNING LABEL FOR POWER CABLE: FIRE HAZARD LABEL ADJACENT TO DOOR:...
- Page 7 SAFETY AND WARNINGS SIGNS ELECTRICAL HAZARD LABEL ADJACENT TO DOOR: LOCATED ON THE REAR SHIPPING SECURITY BRACE: If you need to order more safety or warning signs, call the Laundrylux Parts Department at (516) 371-2000, or call your local dealer.
- Page 8 Ne pas réparer ou remplacer les pièces de l’appareil ou procéder à l’entretien de celui-ci sauf si les instructions visant MANUFACTURED BY HAIER EXCLUSIVELY FOR LAUNDRYLUX...
- Page 9 Missing or illegible ones must be replaced immediately. Be sure you have spare signs and labels available at all times. These can be obtained from your distributor or from Laundrylux. 2. Check the door safety interlock, as follows: (a) OPEN THE DOOR of the machine and attempt to start in the normal manner: For coin-operated models, insert the proper coins to start the machine.
- Page 10 Intentionally blank...
- Page 11 Contents Control Panel + Instructions For Use ..............1:1 Heavy Soil + Extra Rinse ................2:1 Coin Meter ......................3:1 Fault Codes ......................4:1 Operating Mode ....................5.1 Service Mode ....................6.1 Preventive Maintenance ...................7.1 Wash Programs....................8.1 The manufacturer reserves the right to make changes to design, material...
- Page 12 Control Panel The display control panel allows the selection of the main wash programs. As desired, soiling. The control panel consists of program selection buttons (A), option buttons (B), a start button (C), and a display (D) which shows the time remaining and the price for each program.
- Page 13 Instructions for Use Washing • Load garments into the machine and close the door. Do not overload washer. • Add liquid detergent, bleach, and fabric softener as recommended on the product label. Do not level line. Compartment 1 – Powder or liquid detergent Compartment 2 –...
- Page 14 Detergent that is not rinsed away can irritate skin and cause changes to clothing color when heated in a dryer. Laundrylux has implemented a proprietary software algorithm in this washer to help distinguish between over suds and clogged pump strainer basket conditions. Generally, this washer will complete a wash cycle even if a moderate over sudsing or out-of-balance condition is experienced.
- Page 15 Intentionally blank...
-
Page 16: Instructions For Use
Instructions for Use Wash Program Description The machine offers four standard wash programs, and two optional features. The basic wash programs are Cold, Warm, Hot, and Delicate. The optional features are Heavy Soil and Extra Rinse. The options can be added to the basic wash programs (except for Delicate), in any combination. On coin-operated models, a different price can be charged for each program, and an additional price can be programmed for each of the two option buttons. - Page 17 Intentionally blank...
-
Page 18: Coin Meter
Coin Meter In coin-operated machines, prices for programs and options must be programmed during machine Prices can be programmed as dollars and cents or as the number of coins or tokens required to start. There are four wash programs COLD, WARM, HOT, and DELICATE and two options HEAVY SOIL and EXTRA RINSE that can be programmed to the same or different prices. - Page 19 Coin Meter DISCOUNT PRICE “PROMOTION” PROGRAMMING The washer is capable of applying a “Promotion” percentage discount to the vend price of a percentages can be selected using the washer’s built-in Real Time Clock (RTC) or one promotion event can be selected using an optionally-installed, external signal provided by a clock-driven relay or switch.
- Page 20 When the external signal is activated, the washer will apply a promotion percentage discount, set in register 79, to the displayed vend price. Please contact Laundrylux’s Technical Support team at (516) 371-0700 if you have any questions or need assistance with price programming or implementing discount price programming.
- Page 21 If power to the machine is accidentally cut, the machine will restart automatically when power is restored. The machine will resume the program it was running at the point the power was cut. Faults/errors in the program or machine are indicated by a numerical error code on the panel display.
- Page 22 The washer is capable of accepting payment using coins or tokens in COIN MODE or using payment cards in CARD MODE (serial). Setting the machine to COIN MODE and setting all wash program and option prices to “0.00” will allow the machine to operate for free in OPL mode.
- Page 23 and view usage statistics. The service mode also allows a technician to activate individual components of the machine, for troubleshooting. The software also provides a “Limited Service Mode” (LSM) that allows a technician to activate machine components, via PIN entry, without having access to the coin vault service switch.
- Page 24 STATISTICS (NON-RESETTABLE): 000 - Cold program counter. Range: 0000 to F999, (A=10, ... F=15 e.g. “B101” = 11,101) 001 - Warm program counter. Range: 0000 to F999 002 - Hot program counter. Range: 0000 to F999 003 - Delicate program counter. Range: 0000 to F999 004 - Rinse and Spin program counter.
- Page 25 025 - Mainwash time: from 0-999 seconds, default=”360”, i.e. six minutes. 026 - Decimal in price: “00”= default=decimal displayed, ”01”= no decimal (token). 028 - Regret Time: The allowable time, after program start, that a user can change the wash program/options or add items to the wash.
- Page 26 *056 - Detergent pump trigger signal. *057 - Bleach pump trigger signal. *058 - Softener pump trigger signal. *059 - Coin meter test, each dropped coin adds 1 to displayed total. Registers 009 and 010 unaffected. 070 - RTC set-up: 24hr format, “070”>yyyy>mm.dd>hh.mm>”070”. During set up, the RTC is stopped.
- Page 27 - Stop the machine and disconnect the power. Turn off the water supply and check times, reducing productivity. and repair any leak. Contact your local dealer, or Laundrylux Technical Support at (516) 371-0700 if you have questions regarding installation, operation, or maintenance of your machine.
-
Page 28: Wash Programs
Wash Programs COLD COLD HEAVY EXTRA HEAVY SOIL PROGRAM NO OPTION SOIL RINSE EXTRA RINSE PreRinse - - - 2 min C low - - - 2 min C low Drain - - - - - - 3 min C low 3 min C low 3 min C low 3 min C low... - Page 29 Wash Programs WARM WARM HEAVY EXTRA HEAVY SOIL PROGRAM NO OPTION SOIL RINSE EXTRA RINSE PreRinse - - - 2 min CH low - - - 2 min CH low Drain - - - - - - 3 min CH low 3 min CH low 3 min CH low 3 min CH low...
- Page 30 Wash Programs HEAVY EXTRA HEAVY SOIL PROGRAM NO OPTION SOIL RINSE EXTRA RINSE PreRinse - - - 2 min CH low - - - 2 min CH low Drain - - - - - - 3 min CH low 3 min CH low 3 min CH low 3 min CH low Drain...
- Page 31 Wash Programs DELICATE DELICATE HEAVY EXTRA HEAVY SOIL PROGRAM NO OPTION SOIL RINSE EXTRA RINSE PreRinse - - - Available Available Available Drain - - - (DOUBLE (DOUBLE (DOUBLE - - - BEEP) BEEP) BEEP) Drain - - - 4 min C Drain Rinse 1 1 min C high...
-
Page 32: Rinse And Spin
Wash Programs RINSE AND SPIN RINSE AND SPIN* HEAVY EXTRA HEAVY SOIL PROGRAM NO OPTION SOIL RINSE EXTRA RINSE PreRinse - - - Drain - - - - - - Drain - - - - - - Drain - - - Rinse 1 4 min C Drain... - Page 33 Sales and Administration: (516) 371-4400 Spare Parts: (516) 371-2000 Technical Support: (516) 371-0700 En Mexico: 001-800-010-1010 461 Doughty Blvd., Inwood, NY 11096...
Need help?
Do you have a question about the WHLFP817M and is the answer not in the manual?
Questions and answers