Laundrylux CROSSOVER 2.0 Series Operating Manual
Hide thumbs
Also See for CROSSOVER 2.0 Series:
- Training manual (74 pages) ,
- Installation manual (22 pages) ,
- Operating manual (55 pages)
Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Laundrylux CROSSOVER 2.0 Series
Summary of Contents for Laundrylux CROSSOVER 2.0 Series
- Page 1 CROSSOVER 2.0 SERIES In a class by itself DRYER OPER ATING MANUAL DOC. NO. 098538 EDITION 4.2018...
-
Page 2: Important Safety Instruction
• Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire. SAVE THESE INSTRUCTIONS MANUFACTURED BY HAIER EXCLUSIVELY FOR LAUNDRYLUX... -
Page 3: What To Do If You Smell Gas
WARNING FIRE OR EXPLOSION HAZARD • Failure to follow safety warnings exactly could result in serious injury, death or property damage. • Do not store or use gasoline or other flammable vapors and liqids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS: •... - Page 4 Model Numbers Electric DLHF0817EMI DLHF0817E DLHS0817EMI DLHS0817E DLHF0817GMI DLHF0817G DLHS0817GMI DLHS0817G...
- Page 5 Operating Manual WARNING: ALL OPERATING AND MAINTENANCE PROCEDURES SHOWN IN THIS MANUAL MUST BE FOLLOWED AT THE FREQUENCY SPECIFIED FOR PROPER OPERATION OF YOUR MACHINE. PLEASE ENTER THE FOLLOWING INFORMATION AS IT APPEARS ON THE MACHINE(S) DATA PLATE(S). MACHINE MODEL MACHINE SERIAL NUMBER MACHINE TYPE (GAS / ELECTRIC) KEEP THIS MANUAL FOR FUTURE REFERENCE.
- Page 6 Contents Control Panels + Instructions for Use ...............1:1 Coin Meter ......................2:1 Fault Codes ......................3:1 Services Code ....................4:1 Preventive Maintenance ...................5:1...
-
Page 7: Control Panel
Control Panel The display control panel allows the selection of the main drying programs. The panels consist of program selection buttons (A), a start button (B) and a display (C) which shows the price for each program and the drying time designated for each program. In the event of faults, error codes will be displayed. - Page 8 Instruction for Use Dryer Operation Load garments into machine and close the door. Do not overload the dryer. Press the button for the desired program. High Medium No Heat Heating Cooling Start Price/Time Remaining Precio/Tiempo Alta Media Baja Aire Frio Calentando Enfriando Comienzo...
- Page 9 Coin Meter Coin Operation In coin operated machines prices for programs and other operational parameters must be programmed during machine setup. Prices can be programmed as dollars and cents or as the number of coins or tokens required to start and to add additional drying time. There are four drying programs High, Medium, Low, and No Heat.
- Page 10 Coin Meter decimal point is turned off, and prices are set and displayed as “number of coins or tokens” required (e.g. “12”). In either case, the value of each coin drop is stored in Register 031 “Coin Value 1” and Register 032 “Coin Value 2”...
- Page 11 Coin Meter credited time shall be increased before being added to the base price of the drying program. For example, if “Time for amount to start”, (Register 044 – 047) = 30 and Time for additional coin or push, register (048 – 051) = 10 and promotion percentage = 50, then 45 minutes shall be credited when the Amount to start is paid and 15 minutes shall be credited when additional coin 1 pulses are received.
- Page 12 When the external signal is activated, the DRYER will apply Promotion set in register 081, to increase the drying time as explained elsewhere in this manual. Please contact Laundrylux’s Technical Support team at 516-371-0700 if you have any questions or need assistance with price programming or implementing promotion events.
- Page 13 Fault Codes Faults/errors in the program or machine are indicated by a numerical error code on the panel display. Some error codes are cleared automatically when the Start button is pressed and some when the door is opened. For other error codes, a service technician must be called. Error Code Cause / Action E 00...
- Page 14 Service Mode To activate Service Mode for machines with coin meters: 1. Remove the coin box. 2. Press and release the SERVICE MODE plunger switch at the rear of the coin vault. The screen will display “8888”. 3. Press the START button. “SE” appears in the display. 4.
- Page 15 Service Mode 4. Service mode automatically terminates if no pushbutton is pressed for 60 seconds whenever the machine is not running. 5. When service modes 20, 21, 22 or 23 are activated a “background timer is started and shall be used to stop the dryer after running for 90 continuous minutes if the machine has not been stopped by a press of the Start button.
- Page 16 Service Mode Operating Test Registers: Note: Activation of test 020-023 clears previous value stored in register 028. *020 Run, Heat to 65°C (display shows outlet temperature blinking, while operating). *021 Run, Heat to 57°C (display shows outlet temperature blinking, while operating). *022 Run, Heat to 49°C (display shows outlet temperature blinking, while operating).
- Page 17 Service Mode Time for ATS for High heat(range=1-90, default=40). Time for ATS for Medium heat(range=1-90, default=40). Time for ATS for Low heat(range=1-90, default=40). Time for ATS for No heat(range=1-90, default=40). Time for additional coin or push for High heat (range = 0-90, default = 6). Time for additional coin or push for Medium heat (range = 0-90, default = 6).
- Page 18 Service Mode RTC promotion1 “073”>d>hh.mm>%%%>”073” RTC promotion 1 END “074”>hh.mm>”074” RTC promotion 2 START “075”>d>hh.mm>%%%>”075” RTC promotion 2 END “076”>hh.mm>”076” RTC promotion 3 START”077”>d>hh.mm>%%%>”077” RTC promotion 3 END “078”>hh.mm>”078” RTC promotion 4 START”079”>d>hh.mm>%%%>”079” RTC promotion 4 END “080”>hh.mm>”080” Note 073-080 ranges: d= day of week “0”-”A”; 0=promotion inactive, 1=Sunday,2=Monday, ...7=Saturday, 8=Every day, 9= Monday-Friday only, A=Saturday and Sunday only;...
- Page 19 Preventive Maintenance Cleaning A program and/or schedule should be established for periodic inspection, cleaning, and removal of lint from various areas of the dryer, as well as throughout the ductwork system. The frequency of cleaning can best be determined from experience at each location. Maximum operating efficiency is dependent upon proper airflow.
- Page 20 Preventive Maintenance To be carried out by qualified personnel. Every 6 Months (Refer this service to qualified personnel) • Inspect and remove lint accumulation external exhaust ductwork and from dryer’s internal exhaust ducting. • The accumulation of lint in the exhaust ductwork can create a potential fire hazard. •...
- Page 21 Intentionally blank...
- Page 22 Sales and Administration: (516) 371-4400 Spare Parts: (516) 371-2000 Technical Support: (516) 371-0700 En Mexico: 001-800-010-1010 461 Doughty Blvd., Inwood, NY 11096 laundrylux.com...
Need help?
Do you have a question about the CROSSOVER 2.0 Series and is the answer not in the manual?
Questions and answers
We had scheduled deliver and pickup today for a washer and dryer however they delivered but just left a note to call Lowe’s for pick up.
What is the code CLF on the crossover gas dryer? Also hownto fix. Thank you