Laundrylux CROSSOVER 2.0 Series Training Manual page 34

Discount price "promotion" programming using the real time clock or
The washer can apply a "promotion" percentage discount to the vend price of a program selection
at specified times and days. Up to four different promotion discount event times and percentages
can be selected using the washer's built-in Real Time Clock (RTC). Events can also be triggered
using an optionally-installed, external signal provided by a clock-driven relay or switch. This signal
can be used to activate discount on multiple washers. Both options require setup via the service
mode registers, access to which is described in the Service Mode section of this manual.
During machine setup, the promotional discount is represented by a two-digit percentage (%%) and
can range from 0% (no discount) to "A0" = 100% (free wash). When Promotion pricing is active,
the displayed vend price equals the sum of the discounted program price rounded up to the next
multiple of register "033" (Coin value 1) and the option price, which is not discounted. For example, if
Coin Value 1 = 0.25 and a 50% Promotion discount is applied to a COLD ($1.00) wash program with
a HEAVY SOIL (0.25) option selected (1.25 total), the displayed vend price would be rounded up to
"0.75."
To use Promotion percentage discount pricing the washer must be set to "COIN MODE" operation.
Promotion pricing can be used with the washer set to either Decimal or No Decimal in price, Reg 26
= "00" or "01".
PROMOTION PRICING VIA THE REAL TIME CLOCK (RTC)
The RTC and Promotion pricing times are set and displayed in 24hr format. (e.g. 1:15 PM = 13:15).
The promotion days of the week are represented by a two-digit number (nn). The RTC's built in
calendar adjusts for leap years. Promotion pricing set up requires setting the RTC and up to four
pairs of Promotional start and stop times and percentages.
RTC and Promotional Setup
1. Activate the service mode.
2. Navigate to Register 70 (RTC set-up) as explained in the Service Mode section.
2. Press START, this will stop the clock. The year will be displayed as a four-digit number (yyyy).
Edit these values using the COLD, WARM, HOT, and DELICATE buttons.
3. Press START, a two-day digit number "(0d)" for the day of the week will be displayed.
(01=Sunday, 02=Monday, ... 07=Saturday.) Edit this value using the DELICATE button.
4. Press START, the Month and Day will be displayed as two-digit numbers (mm.dd). Edit these
values using the COLD, WARM, HOT, and DELICATE buttons.
5. Press START, the Hour and Minutes will be displayed in 24 hr. format as two-digit numbers (hh.
mm). Edit these values using the COLD, WARM, HOT, and DELICATE buttons.
6. Press START to save the changes and exit register 70. This will reset the clock to the set time,
reset the clock's seconds digit to "00", and restart the clock. This allows synchronizing the
clocks on multiple machines to a master clock such as a wall clock, wristwatch, or cell phone.
7. Navigate to Register "71" (RTC Promotion #1 START) to set the percentage discount, day of the
week and start time for promotion #1.
external signal.