System Installation - Veratron Link Up Instruction Manual

SYSTEM INSTALLATION

Before beginning, disconnect the negative terminal on the battery, otherwise you risk a short circuit.
If the vehicle is supplied by auxiliary batteries, you must also disconnect the negative terminals on these batteries! Short
circuits can cause fires, battery explosions and damages to other electronic systems. Please note that when you disconnect
the battery, all volatile electronic memories lose their input values and must be reprogrammed.
BEFORE THE ASSEMBLY
1. Before beginning, turn off the ignition and
remove the ignition key. If necessary, remove
the main circuit switch
2. Disconnect the negative terminal on the
battery. Make sure the battery cannot
unintentionally restart.
3. Place the device at least 300 mm away from any
magnetic compass.
WARNING
SYSTEM INSTALLATION