Table of Contents
Advertisement
3-7. Pinch Roller Replacement
Outline
Replacement
Pinch arm assembly removal
Pinch roller replacement
Pinch arm assembly installation
Cleaning
Operation check
Adjustment after replacement
Tape running adjustment
Precautions
. The pinch roller can be replaced with the cassette compartment installed.
. The following new E ring is required when replacing the pinch roller.
E ring(2.3): 7-624-105-04
Preparations
1. Put the unit into the unthreading end state.
2. Turn off the power.
3. Remove the upper frame.
(Refer to the maintenance manual Part 1, Section 1-6.)
Tools
. Torque screwdriver bit (for M1.4):
. Torque screwdriver (for 3 kg):
. Oil:
Replacement
1. Pinch arm assembly removal
(1) Turn the manual eject knob counterclockwise
so that the notch of the pinch press cam fits
with the slider of the pinch arm assembly.
BVW-55 P2
J-6325-110-A
J-6325-400-A
7-611-018-18
3-7. Pinch Roller Replacement
Manual eject knob
Pinch press cam
Notch
Slider
3-31
Advertisement
Table of Contents
