Table of Contents
Advertisement
2-2. TAPE Maintenance Mode (M0)
2-2-4. AUDIO/VIDEO ADJUST Mode (A2)
Change of adjustment mode
The relation between the adjustment mode and display is
shown in the table below.
Adj. mode
LCD monitor
Manual adjustment
Manual
Automatically adjustable Auto (Push SET Button)
(i) Turn the JOG dial in REVERSE (3) direction and
move the * mark to line 1 on the LCD monitor. (In a
sub LCD, "MANUAL" or "PUSH SET" is displayed.)
(ii) Turn the JOG dial while pressing the search button.
Manual 8 Automatic: [Search] + DIAL (2)
Manual 7 Automatic: [Search] + DIAL (3)
To execute the automatic adjustment
(1) Display "Auto (Push SET Button)" on the LCD
monitor and "PUSH SET" in the sub LCD referring to
the "Change of adjustment mode" described above.
(2) The automatic adjustment is executed when the SET
button is pressed.
. The display on the LCD monitor changes to "Auto
Adjusting...". The displayed data value also
changes.
The display in the sub LCD does not change.
(3) Confirm the automatic adjustment completion and
each status on the LCD monitor.
. Message "Auto Adjust Complete" is displayed
when the automatic adjustment is completed.
n
If the preparation for adjustment is not proper, mes-
sage "Auto Adjust Failure" is displayed.
(4) To terminate the menu, press the MENU button.
To execute the automatic adjustment again in this
menu, return to step (2).
(5) To save the adjustment data in NV-RAM, execute
SAVE ALL ADJUST DATA in an A2F : NV-RAM
CONTROL menu.
To return the adjustment data to the state before
adjustment, execute ALL DATA PREVIOUS in an
A2F : NV-RAM CONTROL menu.
Caution during manual adjustment
Confirm the adjustment data range in which the display of
video meter is set to the intermediate value (five lines)
when performing the manual adjustment.
n
For the manual adjustment, refer to the "To change the
adjustment data manually" on page 2-21.
2-28
Example of display and operation
LCD monitor
AUDIO/VIDEO ADJUST MODE
A27:VIDEO METER
*
Manual
Sub LCD
VIDEO METER
MANUAL
PUSH SET
(1) 0 [Search] + DIAL(2)
AUDIO/VIDEO ADJUST MODE
A27:VIDEO METER
*
Auto(Push SET button)
VIDEO METER
(2) 0 [SET]
AUDIO/VIDEO ADJUST MODE
A27:VIDEO METER
*
Auto Adjusting...
VIDEO METER
(omitted)
AUDIO/VIDEO ADJUST MODE
A27:VIDEO METER
*
Auto Adjust Complete
VIDEO METER
(3)
(4)
(5)
* A2F:NV-RAM CONTROL
Video meter
COND
AU 1
PAGE
Sub LCD
MANUAL
A9
PUSH SET
A9
PUSH SET
00
0
0
PUSH SET
A5
0
Confirm
[MENU]
0
[MENU]
0
Data save
0
TC
VITC
LTC
525
SX 60
BATT
01 : 23 : 45 : 01
LTC
VITC ON
SDI
F1
F2
F3
F4
Sub LCD
BVW-55 P2
Advertisement
Table of Contents
