Table of Contents
Advertisement
2-2. TAPE Maintenance Mode (M0)
2-2-5. BETACAM PB ADJUST Mode (A3)
2-2-5. BETACAM PB ADJUST Mode (A3)
The A3 : BETACAM PB ADJUST mode is used to adjust
the PB system based on a Betacam/Betacam SP format.
This unit has the eight menus.
A3 : BETACAM PB ADJUST
A32 : DM VR 1
A33 : DM VR 2
A34 : DM VR 3
A35 : DM VR 4
A36 : DM VR 5
A37 : TBC VR 1
A38 : TBC VR 2
A3F : NV-RAM CONTROL
Menu Tree of BETACAM PB Adjustment Mode
c
Do not change the adjustment data carelessly. This may
cause a trouble. For the actual adjustment, refer to the
adjustment method described in Section 7.
If you have changed the adjustment data carelessly,
execute ALL DATA PREVIOUS in an A3F : NV-RAM
CONTROL menu or turn off the power of this unit without
selecting an A3F : NV-RAM CONTROL menu.
Never execute SAVE ALL ADJUST DATA.
n
Betacam/Betacam SP PB function is standard for NTSC
(525/60) system.
It is possible to playback simply in other combinations.
But the PB picture of the other video system is easily
played back by selecting the setup menu.
To change the adjustment data manually
(1) Turn the JOG dial on the LCD monitor and move the
* mark to the adjustment item.
Turn the JOG dial in the sub LCD and display the item
to be adjusted.
(2) Turn the JOG dial while pressing the search button.
The adjustment data then increases or decreases.
2-30
To return the adjustment data to the former state
Execute ALL DATA PREVIOUS in an A3F : NV-RAM
CONTROL menu.
n
The current adjustment data can not return to the former
state after executing SAVE ALL DATA ADJUST DATA.
To save the adjustment data
Execute SAVE ALL ADJUST DATA in an A3F : NV-
RAM CONTROL menu.
n
In a sub LCD, the adjustment item name on the LCD
monitor is omitted during display as follows:
8 GAIN
RF GAIN
GUARD BAND 8 GUARD
METAL
8 M
8 O
OXIDE
BVW-55 P2
Advertisement
Table of Contents
