Table of Contents
Advertisement
3-10. CTL Head Replacement
3-10. CTL Head Replacement
Outline
Replacement
CTL/FE head assembly removal
CTL head replacement
CTL/FE head assembly installation
CTL/FE head assembly cleaning
Adjustment after replacement
Tape running check
Video tracking adjustment
CTL head height adjustment
CTL head position adjustment
AT head position adjustment
c
Never contact the tape cleaner on the CTL/FE head block with bare hands.
The tape cleaner has a sharp edge. Pay careful attention when replacing or
adjusting the CTL head.
Preparations
1. Put the unit into the unthreading end state.
2. Turn off the power.
3. Remove the upper frame.
(Refer to the maintenance manual Part 1, Section 1-6.)
Tools
. Torque screwdriver bit (for M1.4):
. Torque screwdriver bit (for M2):
. Torque screwdriver (for 3 kg):
. Cleaning cloth (15 cm x 15 cm):
. Cleaning liquid:
3-40
J-6325-110-A
J-6325-380-A
J-6325-400-A
3-184-527-01
9-919-573-01
BVW-55 P2
Advertisement
Table of Contents
