Table of Contents
Advertisement
4-10. S Tension Regulator Arm Assembly Replacement
Outline
Replacement
S tension regulator arm assembly removal
S tension regulator arm assembly installation
S tension regulator guide cleaning
Adjustment after replacement
S tension regulator offset/gain adjustment
Tape running adjustment
Preparations
1. Put the unit into the unthreading end state.
2. Turn off the power.
3. Remove the upper frame.
(Refer to the maintenance manual Part 1, Section 1-6.)
4. Remove the cassette compartment.
(Refer to the maintenance manual Part 1, Section1-7.)
Tools
. Torque screwdriver (3 kg.cm):
. Torque screwdriver bit (for M1.4):
. Cleaning cloth (15 cm x 15 cm):
. Cleaning liquid:
BVW-55 P2
J-6325-400-A
J-6325-110-A
3-184-527-01
9-919-573-01
4-10. S Tension Regulator Arm Assembly Replacement
4-37
Advertisement
Table of Contents
