Table of Contents
Advertisement
Setting Power Save mode
You can reduce the power spending during the standby
mode.
l /6
Press l /6 on the VCR.
The VCR goes into Power Save mode and the display
window turns off.
The power consumption during the Power Save mode is
approximately 2.5 W.
During Power Save mode, the buttons on the remote control
(except l /6) are not operable and the cassette cannot be
ejected.
To cancel the Power Save mode
Press l /6 on the VCR or the remote control.
Notes
• When the VCR is set to make a timer recording, the VCR
does not go into Power Save mode even if you press l /6 on
the VCR.
• If you press l /6 on the remote control to turn off the VCR,
the VCR does not go into Power Save mode.
28
ENGLISH
ADDITIONAL INFORMATION
Care and maintenance
To clean the cabinet
Wipe with a soft dry cloth.
If the surfaces are extremely dirty, use a soft cloth lightly
moistened with mild detergent solution. Do not use strong
solvents, such as alcohol, benzine or thinner as these could
damage the finish of the unit.
Do not stick a seal or an adhesive label
Do not stick a seal or an adhesive label on the surface for a
long time. The finish of the unit may be damaged or come off.
When noises are heard from the radio or another audio/
video equipment
Separate the equipment from this unit.
Head Cleaning
The VCR cleans the video heads automatically every time a
cassette is inserted or ejected. This will prevent the dirt
accumulating on the heads. However, manual cleaning is
still necessary after a long period of use. If the unit detects
any dirt on the heads after playing back a tape for more than
30 seconds, "DUST ON THE HEADS!" is displayed on the
TV screen. In this case, clean the video heads with a
commercially available cleaning tape. If you continue to use
the VCR without cleaning, the picture may be clogged or
you will not be able to play back at all.
Before cleaning, please refer to the cleaning tape operating
instruction for details.
When the playback picture is noisy
When the noise becomes worse
DUST ON THE HEADS!
Worn out video heads
If the playback picture has not improved with the cleaning,
the video heads may be worn out and needs to be changed.
In this case, please seek the advice of your local dealers.
Advertisement
Table of Contents
