GMC 1995 Suburban Owner's Manual page 444

Table of Contents

Advertisement

I
Maintenance Schedule
I
-
Diesel Engines
I
(Corztin~recl)
0
Check real-/fi-ont axle tluid level and add fluid
a s
needed. Check
constant velocity joints and axle seals for leaking.
' j : : i :
DATE
SERVICED BY:
ACTUAL MILEAGE
52,500 Miles
(84
000 km)
0
Change engine oil and filter (or every 3 months, whichever occurs
first). An EIr7issio/1 Control Ser-lYc.e.
0
Lubricate the front suspension, king pin bushings, steering linkage.
transmission shift linkage, transfer
case
shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is 10" F
(-12" C), or higher. When weather is cold. let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every I2 months, whichever occurs first).
0
Rotate tires. See "Tire Inspection and Rotation" i n the Index for proper
rotation pattern and additional information. See "Tires" in the Index.
7-76

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1995 yukon

Table of Contents