GMC 1995 Suburban Owner's Manual page 358

Fuse Block
The fuse block access
door is on the driver's
side edge of the
instrument panel. Pull
off t.he cover to access
the fuse block.
You can remove fuses
with a fuse extractor.
The fuse extractor is
mounted to the fuse
block access door.
To remove fuses if you don't have a fuse extractor. hold the end of the fuse
between your thumb and index finger and pull straight out.
Be sure to use the correct fuse. If you ever have a problem on the road and
don't have a spare fuse. you can "borrow" one of the correct value. Just pick
some feature of your vehicle that you can get along without-like the radio
or cigarette lighter-and use
its fuse, if
it
is of the value you need. Replace
i t as soon as you can. See "Fuses and Circuit Breakers" in the Index for
more information.
Specification Charts
Replacement Parts
Replacement part numbers listed in this section are based on the latest
information available at the time of printing, and are subject to change. If a
part listed in this manual is not the same as the part used in your vehicle
when it was built, or if you have any questions, please contact your GM
truck dealer.
Engine Identification
-
Gasoline Engines
Engine
T Y Pe
VIN Code
Fuel System
Emissions
7.4L
V8
N
TB I?
HD
'#Light Duty Emissions with 8,500 Ibs. ( 3 850 Kg) GVWR and below.
'$*Heavy Duty Emissions over 8,500 lbs. ( 3 850 Kg) GVWR.
?Throttle Body In-jection