GMC 1995 Suburban Owner's Manual page 37

To
unlatch the seat
from the floor, pull up
on the center release
handle at the rear of
the seat and lift the
rear of the seat up, out
of the floor.
Turn the seat sideways and take it out of the vehicle.
To put the seat back in, hold the seat sideways and put it into the vehicle.
Turn the seat to the forward position and set it down, with the latches at the
bottom of the seat over the hooks in the floor. Pull up on the center release
handle and let the seat drop into place. Release the handle to let the seat
latch close and make sure it locks into place. Then, move the seatback
release lever at the right rear of the seat toward the center of the vehicle and
raise the seatback.
After returning the seatback to the upright position, push the seatback
forward to make sure it is locked in place,
Then, return the outside passenger position safety belts to the seat frame
buckles, So they will be available for rear seat passengers to use.
1-17