GMC 1995 Suburban Owner's Manual page 388

Maintenance Schedule I
-
Gasoline Engines With
Light Duty Emissions
33,000 Miles (55 000 km)
0
Change engine oil and filter (or every 3 months, whichever occurs
first). An
Enzission
Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is 10"
F
(-12" C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every 6 months, whichever occurs first).
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints rind axle seals for leaking.:l::i:
DATE SERVICED BY: ACTUAL MILEAGE
I
36,000 Miles (60 000 km)
0
Change engine oil and filter (or every 3 months, whichever occurs
first). An Emission Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is IO" F
(-12" C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every 6 months, whichever occurs first).
7-20