GMC 1995 Suburban Owner's Manual page 428

I
Maintenance Schedule II
-
Gasoline Engines With
Heavy Duty Emissions
54,000 Miles (90 000 km)
n
0
Change engine oil and filter (or every 12 months, whichever occurs
first). An EInissioil Control Sc~rvic~c~.
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable. guides, rear driveline center splines. front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is 10" F
(-I 2" C ) , or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service i t e m
a t
this mileage
interval (or every I2 months, whichever occurs first).
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for
Replace spark plugs. A n Emi.s.siou Corltrol Serliw.
Rotate tires. See "Tire Inspection and Rotation" in the Index for proper
rotation pattern and additional information.
DATE
SERVICED BY:
ACTUAL MILEAGE
L
60,000 Miles (100 000 km)
0
Change engine oil and filter (or every 12 months, whichever occurs
first). An Emissiolt Control Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case. shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is I O " F
(-I 2" C), or higher. When weather
is
cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every 12 months, whichever occurs first).