7.1 Maintenance - Configuration, Data File Import / Export - VENTRA XDR-450/D User Manual

7.0 Maintenance – Configuration File Import / Export
NOTE: If using both corded USB mouse to control and USB thumb drive for Firmware
storage, a USB hub may be used to provide multiple USB port
In the configuration menu, user can export and or import configuration
file for system settings. This can be used for restoring a system, loading
templates for setting up multiple XDR with same configuration.
• Insert USB Thumb drive to export the configuration file to the root
folder, file name is ConfigFile
• Insert flash drive to import configuration file into XDR. System will
display notice when import successfully completed
Remark: Config file does not import the register info and speed adaption info.
7.1 Maintenance – File Data Export Setup
XDR supports exporting of data to USB thumb drive for specific file and time
frame
GPS data file, vehicle info file, ACC info file, CAN info
Data Export File Type:
file, Dial info and Captured pic.
• Select All or specific time period to export
• Select start and end time
• Select file type
Maintenance – Configuration
39