Table of Contents
Advertisement
Quick Links
XDR-450/H
5 CH Hybrid HD Mobile DVR
This manual covers the setup, connection and
features of the XDR.
software, refer to Ventra software manual
Please read and follow all instructions and
features before use. Save for future reference.
For latest update and specs, please visit
www.ventrainc.com
User Guide
For management
Manual Ver 02 16
Advertisement
Table of Contents
Related Manuals for VENTRA XDR-450/H
Summary of Contents for VENTRA XDR-450/H
- Page 1 This manual covers the setup, connection and features of the XDR. For management software, refer to Ventra software manual Please read and follow all instructions and features before use. Save for future reference. For latest update and specs, please visit www.ventrainc.com...
-
Page 2: Table Of Contents
Table of Content INTRODUCTION……………………………………………………………………………………………………………………………………………4 WARNING: SAFETY PRECAUTIONS…………………………………………………………………………………………………….……..5 WARNING: LAWS AND REGULATIONS………………………………………………………………………………………………………….6 SD CARD PRECAUTION, REQUIREMENT……………………………………………………………………………………………………….7 SYSTEM LAYOUT………………………………………………………………………………………………………………………………………….8 SYSTEM DIMENSION……..…………………………………………………………………………………………………………………………..9 SYSTEM COMPONENTS…………………………………………………………………….............10 SYSTEM CONNECTION OVERVIEW......................……11 ALARM CABLE……............................……..12 RS232/485/DIAGRAM............................13 CONNECTION CONNECTING ANALOG CAMERA…………………………………………………………………………………………………………………14 CONNECTING HD CAMERA …..........................15 XDR SYSTEM SETUP VIA MOUSE …........................16 XDR SYSTEM SETUP VIA MOUSE …........................16 XDR SYSTEM SETUP VIA EX4-PGM….........................17 SECTION 1: SYSTEM SETUP / FORMAT SD CARD... - Page 3 Table of Content SECTION 4: SURVEILLANCE / RECORD SETTING 4.0 - 4.2 SURVEILLANCE – LIVE VIEW, AUTO LOOP, ON SCREEN DISPLAY..……………..….…………..….………..25 4.3 – 4.4 SURVEILLANCE – RECORD GENERAL SETTING, MAIN STREAM……..…………………………….………..26 SURVEILLANCE – RECORD MAIN STREAM CONTINUED……..………………………….…………………………..27 4.5 – 4.6 SURVEILLANCE – RECORD DUAL STREAM, ON SCREEN DISPLAY…….……………………..……….………….28 4.6 –...
-
Page 4: Introduction
Design for rugged and demanding environmental factors such as heat, vibration and extended continuous recording cycles. Equipped with customizable settings enable Ventra MDVR to not only record Audio, Video, Speed and Route History, it offers various fleet management capabilities for Safety, Security and Risk Management. -
Page 5: Warning: Safety Precautions
Failure to follow these safety warnings could potentially result in an accident, collision resulting in serious injury or death Install the device in a manner that does not obstruct the driver’s view of the front or sides of the vehicle, or interfere with the safety of operating the vehicle. •... -
Page 6: Warning: Laws And Regulations
Use of this product other than its intended purpose is strictly prohibited. Ventra Technologies Inc. does not assume any responsibility for any fines, violation, penalties or damages that may be incurred as a result of the use of the product Ventra Technologies Inc. -
Page 7: Sd Card Precaution, Requirement
When unspecified memory class are used, XDR may not record data properly and recordings may be lost or damaged • Ventra is not responsible for any damage , data loss, or system error resulting from SD card error and or damage, •... -
Page 8: System Layout
System Layout Front IR Receiver Remote Control Signal Recording Indicator Error indicator GPS status indicator Power indicator VLOSS Video loss indicator Network Connection (XDR 550 /580) FW upgrade / Video export Primary SD Card Slot Record video data files Secondary SD Card Slot Expansion / Mirror data slot DVR cover detection / Auto shutdown when DVR cover detection / Auto shutdown when... -
Page 9: System Dimension
System Dimension Dimension in mm... -
Page 10: System Components
System Components Included: EX4-PIG Video out Software / Camera GPS Receiver SD Card Cable Power Cable Manual Optional: EX4-PIG EX4-ALC EX4-PGM Tablet EX5-CBLxx EX4-CBLxx EX4-XC2 Analog EX4-XC3 Analog EX5-XC1 720P HD EX5-XC2 720P HD Converter Cable 8 Input Alarm for Programming / Camera Patch Analog Camera Outdoor Camera... -
Page 11: System Connection Overview
XDR System Layout Diagram • Connect Analog cameras into AV IN 1 – 4 • Connect Ventra EX5-HD Camera to IPC • Connect external passive GPS receiver • Connect Power cable to vehicle • Connect A/V Out (EX4-PIG) to monitor •... -
Page 12: Alarm Cable
XDR Series Alarm Cable Guide Alarm Cable Layout Alarm Cable Can Be connected for a wide array of applications For Sensor In: • Door Open / Close High Voltage: 5~12V • Light Trigger Low Voltage : 0~2V • Siren Trigger •... -
Page 13: Rs232/485/Diagram
XDR RS232 / RS485 Cable Guide RS232 / RS485 Serial Cable Layout RS232 / 485 Connection For: • PTZ cameras • G Sensor • 485 Bus Data • 485 GPS Data RS232 / 485 Connection For: Baud Rate 2400 - 115200... -
Page 14: Connecting Analog Camera
Audio / Video & Power (Fig. 2) Option 2: Coax / RG59 Cable - Utilize Ventra EX4-PIG to convert from 4 PIN DIN to standard BNC Video / Audio and 2 power wires to support 3 2 power wires to support 3 party analog D1 camera. The system can then be party analog D1 camera. -
Page 15: Connecting Hd Camera
HD 6PIN Patch Cable xx denotes length (EX5-HD1, EX5-HD2) Ventra EX5-CBL HD Camera 6PIN Patch Cable - Utilize Ventra pre-made EX5-CBL patch cables (sold separately) available in 15 or 30ft to connect EX5-HD camera (Fig. 1 EX5-CBLxx xx denotes length - Each EX5-CBLxx patch cable comes with 6 PIN DIN for easy connection to Fig. -
Page 16: Xdr System Setup Via Mouse
XDR Setup Connection via Mouse and Video Out 1. XDR Front Panel – SD Card Slots, USB Port and System LED 2. Connect USB mouse to XDR for programming 3. XDR Rear – Connect EX4-PIG to AV-OUT port on 4. XDR Rear – Connect EX4-PIG to RCA video connection to XDR for video out connection to monitor. -
Page 17: Xdr System Setup Via Ex4
XDR Setup Connection via EX4-PGM 1. Connect EX4-PGM to extension cable 2. Connect EX4-ALC (Sold Separately) to Sensor/Serial Port. Connect EX4-PGM to EX4-ALC 3. Once the wires are connected, the EX4-PGM will be powered by the XDR... -
Page 18: Osd Menu Screen
OSD Menu Layout Live View Display Screen Mode Playback System Status Setting... -
Page 19: 1.2 Getting Started - Format Card / Enter System Setting
Do NOT format or Repair the card via PC. (This is a safety feature of the system). Data can only be recognized by the Ventra DVR Software Insert or Remove SD card while XDR is powered ON To connect to the XDR, there are 2 methods... -
Page 20: Basic Setup - Register System, Driver Id, Vehicle Id
Basic Setup – Register Vehicle / Driver / Device ID 2.0 Register – Vehicle / Driver / Device Info Note: Save each tab individually before proceeding to next tab throughout the entire programming process Device ID: currently not in use Vehicle Info Vehicle Number (Required for software to identify system) Vehicle Plate (Optional) -
Page 21: 2.2 Basic Setup - Date / Time Setup, Day Light Savings
Basic Setup – Date / Time Setup 2.1 Time setup – Date / Time Note: Save each tab individually before proceeding to next tab throughout the entire programming process Set Date / Time Format Set Time Zone Time Sync - set date and time Enable Satellite time sync via external GPS receiver. -
Page 22: 2.4 Basic Setup - System Startup, Battery Protection
Basic Setup – System Startup 2.3 Startup – On / Off On / Off: How the XDR is activated (3 Modes) Ignition Timer Ignition or Timer Ignition Delay: Time delay between vehicle ignition off to XDR powering off (0-300 seconds) Ignition: XDR powers on as vehicle ignition is on Timer : If Timer option is selected, the schedule for Start and End Time must be set . -
Page 23: Basic Setup - User Setup, Password
Basic Setup – User Setup 2.5 User Setup Idle Time: The length of time the system remains in settings mode before logging out. Recommend (10 Minutes) User Name: Default are admin and user User Group: It is categorized as Administrator and Normal user Admin: View videos, change settings and export logs User: View videos but cannot change settings or logs Add, Delete or Edit... -
Page 24: Network, Wifi , 3G Not Available On Xdr450/H
Basic Setup - Network Setup – LAN, FTP WiFi, 3G Cellular, Server Applicable only for XDR-550/H and XDR-580/H (Available Mid 2016) -
Page 25: 4.2 Surveillance - Live View, Auto Loop, On Screen Display
Surveillance – Live View 4.0 Surveillance – Live View - Preview Preview Audio: Enable / Disable audio during live view of cameras Image Setup: Adjust live view parameters - Color, Contrast, Brightness Margins: Adjust live view screen setup Startup Screen: Set live view display in Single, Quad or Nine CH mode Channel: Select the channels to display on screen Note: 1 CH can only select 1 4CH Must Select 4... -
Page 26: 4.4 Surveillance - Record General Setting, Main Stream
Surveillance – Record – General / Main Stream 4.3 Surveillance – Record - General Reminder: Save each tab individually before proceeding to next tab This section covers the general system wide setting of the XDR System – PAL / NTSC (Default = NTSC) Overwrite: How the system stores new recording once the storage is full - Capacity: As SD storage is full, system will overwrite oldest data - Date: XDR will overwrite old data based on date... -
Page 27: Surveillance - Record Main Stream Continued
Surveillance – Record – Main Stream 4.4 Surveillance – Record – Main Stream (Continued) Reminder: Save each tab individually before proceeding to next tab Quality: Video quality in relation to Bit Stream ( 1 – 8, 1 = Best) Default = 3 Record Mode: Select how the camera is activated - Ignition / Power: When vehicle ignition is on - Event: Only when an event occurs... -
Page 28: 4.6 Surveillance - Record Dual Stream, On Screen Display
Surveillance – Record – Dual Stream 4.5 Surveillance – Record - Dual Stream Reminder: Save each tab individually before proceeding to next tab!! This section covers what type of storage is used and the recording method of the 2 SD card (If utilized). -
Page 29: 4.7 Surveillance - Ex5 Hd /Ipc Camera Setup
Surveillance – IPC / HD Camera Setup 4.7 Surveillance – IPC / HD Camera Setup NOTE: This section is solely for the configuration, enabling and setting for the EX5-HD series cameras which is a 720P HD resolution IP camera. Each camera has its own internal IP address within the XDR Default IP address for the HD camera = 10.100.100.1 Any IP cameras can start from IP address... -
Page 30: Surveillance - Ptz Camera Setup
Surveillance – IPC / HD Camera Setup 4.8 Surveillance – PTZ NOTE: PTZ settings applicable only for PTZ enabled analog or IP cameras Setup: Enable / Disable PTZ function in each Channel Operate: Serial / N9M, ONVIF. Protocol Type: Serial Mode Supports - N9M - Onvif - Pelco D... -
Page 31: 5.2 Cod Sensor - General Sensor, Serial, Speed
Collection of Data – General 5.0 Collection – General - Sensor Note: Save each tab individually before proceeding to next tab Sensor Number: Select from drop down menu of the sensor to edit Sensor Name: Optional – assign name to each sensor (i.e. Door, trunk, lift arm) OSD Name: The name embedded in video and data recordings Copy: If settings are the same, select Copy To individual or all sensors 5.1 Collection –... -
Page 32: 5.4 Cod Sensor - Image Snapshot Time, Trigger Setting
Collection of Data – General 5.3 Collection – Snap Setting – Time Snap Start Time / End Time: Set schedule of image snapshot. Check the Time Stamp Box to enable, edit and add. Edit by selecting the menu icon. Delete by selecting the X icon Add: XDR supports up to 8 different schedules for image Snapshot configuration 5.4 Collection –... -
Page 33: Alarm - Overspeed
Alarm – Base Configuration 6.0 Alarm – Base – Speed Alarm Enable / Disable Overspeed Event trigger Alarm Type: Important or General Trigger: Set speed limit trigger - Overspeed Early Warning If max speed is set at 60 MPH, when vehicle reaches 50 MPH, system will trigger and activate an alert to optional external device (light, buzzer) - Speed: Max vehicle speed limit - Alarm duration ( 0 -255 seconds) -
Page 34: Alarm - Panic Alarm
Alarm – Base Configuration 6.1 Alarm – Base – Panel Alarm Enable / Disable Panic Alarm trigger Alarm Type: Important or General Trigger: Set time delay for panic alarm activation 0 -255 seconds Alarm Linkage: Channel: XDR supports multiple cameras to be assigned for recording when specific alarm is triggered Post Recording: Duration of recording to be marked as post alarm event Lock: Lock specific alarm recording to keep for specified duration –... -
Page 35: Alarm - Input Alarm
Alarm – Base Configuration 6.2 Alarm – Base – I/O Alarm Enable / Disable I/O Alarm trigger 1 - 8 Alarm Type: Important or General Trigger: Low or High trigger (Default is Low for alarm trigger) For Sensor In: For Sensor Out: High Voltage: 5~12V Triggered Voltage: 12V Low Voltage : 0~2V... -
Page 36: 6.3 Alarm - Video Loss
Alarm – Base Configuration 6.3 Alarm – Video Loss Enable / Disable Video loss Alarm Alarm Type: Important or General Trigger: Channel selection Channel: Select channels to detect video loss Set Period / Schedule: Create schedule for video loss detection Channel: XDR supports multiple cameras to be assigned for recording when specific alarm is triggered Post Recording: Duration of recording to be marked as post alarm event... -
Page 37: Alarm - Advance
Alarm – Base Configuration 6.4 Alarm – Advanced G Sensor Alarm – Feature Currently Not Available... -
Page 38: 7.1 Maintenance - Configuration, Data File Import / Export
Maintenance – Configuration 7.0 Maintenance – Configuration File Import / Export NOTE: This feature is only available when using EX4-PGM programming tablet to access the XDR, and not available if using a mouse to connect to the XDR as the USB port is occupied. In the configuration menu, user can export and or import configuration file for system settings. -
Page 39: Maintenance - Firmware Upgrade
Maintenance – Upgrade 7.2 Maintenance – Upgrade (Firmware) NOTE: This feature is only available when using EX4-PGM programming tablet to access the XDR, and not available if using a mouse to connect to the XDR as the USB port is occupied. In the Upgrade menu, user can update Firmware for XDR, EX5-HD camera (IPC) or EX4-PGM (CP4) programming tablet. -
Page 40: 7.3 Maintenance - Storage Format
Maintenance – Storage Format 7.3 Maintenance – Storage Format NOTE: Do NOT insert or remove the SD card when the system is powered on, it may cause system error and corrupt recording files XDR uses a proprietary file format, all SD cards MUST be formatted in the XDR prior to recording. -
Page 41: Technical Specification
Technical Specification Function Overview Preview, Recording, Playback, Route History Linux 2.6.24 System Control Mode IR remote control Input 5 channels (1) 720P HD, (4) D1 ANALOG Video Output 1 channel Video System NTSC/PAL optional Input 5 channels (From Camera) Audio Output 1 channel Display Split... -
Page 42: Warranty / Rma
Product Warranty Ventra Technology warrants the system against defects in material and workmanship for a period of one (1) year from the date of original purchase. During this period, Ventra’s liability for any defective product, or any product part, shall be limited to the repair or replacement of the product, at Ventra’s sole discretion. - Page 43 Innovative solutions in vehicle and mobile video technology 1578 W. San Bernardino Rd. # E, Covina, CA. 91722 USA www.ventrainc.com / info@ventrainc.com Tel: 888 418 3833...
Need help?
Do you have a question about the XDR-450/H and is the answer not in the manual?
Questions and answers