Related Manuals for VENTRA VLCD-K7 Series
Summary of Contents for VENTRA VLCD-K7 Series
- Page 1 VLCD-K7 Series Blind Spot Vision Enhancement / DVR System Installation / User Guide Please read and follow all instructions before install and operation. Save for future reference. For latest update and specs, visit www.ventrainc.com Manual Ver 10 22...
- Page 2 Never solely rely on camera displays. Always physically check surrounding to ensure complete safety while operating the vehicle or equipment Ventra vision enhancement system is a technology to aid driver in operating the vehicle. It is the complete responsibility of the driver to ensure safe driving Install the device in a manner that does not obstruct the driver’s view of the front or sides of the vehicle, or interfere with the safe operation of vehicle...
- Page 3 Ventra VLCD-K7 system - Suitable for Vehicle, Equipment and Asset Ventra vision enhancement system is ideal for any type of vehicle and asset including Vans, SUV, Semi Tractors, Specialized Vehicle, Construction, Farm Equipment, Forklifts and Trailers...
-
Page 4: Feature Highlight
Feature Highlight ▪ 3 -1 Multifunction System: Blind spot / front and rear-view camera display, Rear object sensor detection, LCD screen display and video recorder ▪ 7” LCD Hi Resolution monitor connects up to 4 cameras ▪ Minimize blind spots with wide angle view cameras ▪... - Page 5 System Layout Wiring Diagram Conn IMPORTANT System must have constant power to retain system clock, or else the date and time will revert to factory default. Ensure the YELLOW Wire (12V) is connected to a constant 12V Source fuse. This will NOT drain vehicle battery...
- Page 6 LCD Monitor Layout Short press to access Settings menu / Long press for 3 Menu seconds to access video playback menu CH 1 Display CH 1 image Display CH 2 image, OK button applicable when in settings CH 2 / OK menu Power Screen off, Power off system...
- Page 7 Install VLCD-74PR LCD monitor 1. Depending on the vehicle, the LCD monitor may be ceiling mounted or dash mounted. The U Shape monitor bracket can be flipped based on location 2. Different mount options may be used – monitor has slide rail on the rear, as well ¼...
- Page 8 When finding turn signal, find the TRUE Turn Signal. Use voltage meter to measure the wire of turn signal. Example: Tap the brake and see if there’s voltage. If there's voltage on the wire, then it’s a multipurpose wire – do not connect Ventra turn signal trigger wire to...
- Page 9 CH 3 Input = Driver Side Camera EX88-XC3D Side camera for both driver and passenger side CH 4 Input = Passenger Side Camera Camera angle should NOT be obstructed by any object. Camera should be placed at least 3 inches above fender IMPORTANT –...
- Page 10 EX88-XC3D Side camera for both driver and passenger side - continued IMPORTANT Always use cable loom to protect the cable from objects, sharp edges and liquid. Use cable tie to secure cable Keep cable away as far away as possible from engine and high temperature components. Leave Can route camera cable with existing vehicle cable to ensure optimal routing back into the vehicle compartment...
- Page 11 EX88-XC5D rear camera on the rear of truck, van, equipment - (Refer to next page for cable routing) Camera placement should be as close to the center as possible and not be obstructed by any object to ensure full video image. If there are existing lights or objects on the vehicle, mount the camera to either side, or below any objects such as racks or ladder ¼”...
- Page 12 EX88-XC5D rear camera on the rear of truck, van, equipment - continued For sidestep van: can run the rear camera cabling from the DRIVER SIDE to the back of the truck Use cable loom to protect cable and cable tie to secure cable. Make sure it does not dangle or get caught in the rear door panels and springs Leave some slack in the cable to minimize tension from vehicle movement Once rear camera is mounted, check and adjust the camera angle as needed...
-
Page 13: System Settings
For Radar Display, Select OFF as VLCD-K system does not include rear sensors System Settings Quad 4 CH, Quad “H Mode” T-Shape Display Mode Select preferred camera display mode 3 CH, Split Screen To access the Settings Menu, press Video File Each video recording length duration 1 minute, 3 minutes, 5, minutes Segment... - Page 14 Video Recording / Format SD Card / Parking Mode Recording Intelligent auto video recording of all 4 cameras simultaneously when system powers on, regardless how many cameras are installed, and which camera(s) is displayed on the Split Screen View screen. (Red Dot Indicates Recording) Video recording duration is user configurable (1 min, 3 min, 5 min) in settings menu.
- Page 15 Video Playback: In LCD monitor Press MENU button for 3 seconds to enter video playback album Navigate menu via UP / DOWN arrow to select video file. Each camera channel records its own video file and is displayed separately in the album as: (F = Front, B = Back, L = Left / Driver, R = Right / Passenger) Videos are stored in chronological order.
-
Page 16: Video Display Mode
Video Display Mode System can be configured to display multiple camera viewing options 1 Cam Full Screen, 2 Cam Split Screen, 3 Cam Tri-View, Quad Square, Quad H Press Mode to manually navigate Camera display sequence Press CH 1, CH2, CH3, CH 4 button to select individual full screen image Default viewing mode is Triplex, 3 CH T-Shaped display consisting of the Rear Camera on the Top, Driver side camera on the Left and Passenger side camera on the Right To change default display mode >... - Page 17 Ventra Technology warrants the system against defects in material and workmanship for a period of one (1) year from the date of original purchase. During this period, Ventra’s liability for any defective product, or any product part, shall be limited to the repair or replacement of the product, at Ventra’s sole discretion.
- Page 18 Advanced Vehicle Video, Visibility and Cloud Solutions Provider Copyright © 2022 All rights reserved. This user guide or any portion thereof may not be reproduced without the express written permission from Ventra Technology Ventra Technology Inc. www. Ventrainc.com info@ventrainc.com...