1.2 Getting Started - Format Card / Enter System Setting - VENTRA XDR-450/D User Manual

1.1 Formatting the SD Card
1. XDR utilizes a propriety file format for security , each card MUST be formatted IN the XDR
prior to use.
2. MS Windows will NOT recognize the SD card when inserted and will display error message
and ask to Repair or Reformat the card.
safety feature of the system). Data can only be recognized by the Ventra XDR Software
3. Do NOT Insert or Remove SD card while XDR is powered ON
4. To connect to the XDR, there are 2 methods
- Mouse to the USB port on the XDR
- EX4-PGM programming tablet
5. To Format the card, Login to XDR Settings by selecting the
Maintenance > Storage
- Default ID: admin
- Password: admin
6. Select Maintenance Tab > Storage Tab > pick the SD Slot to format (Any previous data will
be erased)
7. Top Slot = Primary, Bottom Slot = Secondary. (If using only 1 card, insert into Top Slot)
8. Each system support 2 Slots for SD card up to 128GB max per slot. To add additional card,
please use only CLASS 10 and UP or UH1
To access the OSD keyboard, click mouse in each field. Or use touch screen if utilizing
EX4-PGM programmer
Enter =
Cancel =
Cursor =
Getting Started
Do NOT format or Repair the card via PC.
> Login >
(This is a
Setup >
20