Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
XDR-1280/D
12 CH Hybrid HD Mobile DVR
(4)
1080P IPC +
(8)
Analog 1080P/720P AHD, D1
Quick Start Guide
This manual covers the setup, connection and
features of the XDR.
software, refer to Ventra software manual
THIS MANUAL CONTAINS UPDATED FEATURES
AND SPECIFICATION.
UPDATE NOTICE
For management
PLEASE REFER TO
Please read and follow all instructions and
features before use. Save for future reference.
Specification, models and features are subject
to change without prior notice
www.ventrainc.com
Manual Ver 08 18
Advertisement
Table of Contents
Related Manuals for VENTRA XDR-1280/D
Summary of Contents for VENTRA XDR-1280/D
-
Page 1: Quick Start Guide
Analog 1080P/720P AHD, D1 Quick Start Guide This manual covers the setup, connection and features of the XDR. For management software, refer to Ventra software manual THIS MANUAL CONTAINS UPDATED FEATURES AND SPECIFICATION. PLEASE REFER TO UPDATE NOTICE Please read and follow all instructions and features before use. - Page 2 When unspecified storage are used, XDR may not record data properly and recordings may be lost or damaged • Ventra is not responsible for any damage , data loss, or system error resulting from HDD or SD card error and or damage, computer issues or virus •...
- Page 3 XDR-1280/D Camera Frames Per Second (FPS) Chart Camera Resolution Channels AHD-720 IPC-1080P AHD-1080P IPC-1080P AHD-1080P IPC-1080P AHD-1080P IP1080P AHD-720P IPC-1080P Video Stream Rate and Storage Based On Video Quality Level (1 – 8) Stream (kB/s) 1024 352 x 240 MB / Hour /...
-
Page 4: System Components
System Components Included: (1) EX4- XC1D X12-CAM8 EX12-MPIG Male Remote Software / 1TB SSD 720P Passive Camera input DIN to BNC Video Controller Power Cable Manual XDR-1280D MDVR Receiver cable Cable Camera Optional: EX12-ALC EX4-XC4 XDR-PON 4 Port EX5-CBLxx EX4-CBLxx 4 pin EX5-HD2 720P EX4-XC2 Analog... - Page 5 XDR System Layout Diagram EX12-MPIG 3 Wires: - 12 / 24V DC ( - GND ( BLK ) - ACC / IGN...
- Page 6 Powering the XDR (12V / 24VDC) Fig. 1 Pic of Power Cable 1. Insert the appropriate fuse blade into the Red power cable Blue Fuse = 12V Brown Fuse = 24V 2. Connect the 3 power wires to the vehicle’s fuse = 12VDC Power Yellow = Ignition / Accessory...
- Page 7 Connect Ventra EX4-XC series 1080P, 720P AHD and D1 resolution camera (4 PIN DIN) Figure 3 EX12-CAM8 Figure 1 Figure 2 EX4-CBL (EX4-XC1D, EX4-XC2, EX4-XC2D, EX4-XC4) with 4 PIN DIN - Connect the EX12-CAM8 cable to the AV IN connector at the rear of the XDR...
- Page 8 Connect Power to XDR and XDR-PON Fig. 1 XDR-PON Switch For EX5-HD1, EX5-HD2, EX5-HD3IP1080 cameras Requires Ventra EX5-CBLxx 6PIN DIN cable and XDR-PON 4 camera switch (sold separately) • Connect the power cable included with the XDR-PON to both the XDR-1280 and the PON...
- Page 9 Connecting Ventra EX5 HD series 1080P, 720P IP camera (6 PIN DIN) Fig. 2 Connect Power to XDR and XDR-PON Fig. 1 XDR-PON Switch For EX5-HD1, EX5-HD2, EX5-HD3IP1080 cameras Requires Ventra EX5-CBLxx 6PIN DIN cable and XDR-PON 4 camera switch (sold separately) •...
- Page 10 EX4-PGM (OPTIONAL) 7” Touch Screen Programming Tablet and LCD monitor EX4-PGM - optional • Programming XDR system • LCD monitor for live viewing / back up • Touch Screen for easy access Connect the EX4-PGM with the 5M extension cable to the “Panel” Connector on XDR...
- Page 11 XDR-1280 Video Out to LCD Screen Connection 2. Using AV Out 1 port to connect to EX12-MPIG included with XDR 1. Connect EX12-CAM8 to XDR 3. Use a BNC to VGA Converter to connect to the Video 4. Connect RCA cable to EX12-MPIG Cable Lead on EX12-MPIG...
- Page 12 OSD Menu Layout Live View Display Screen Mode Playback System Status Setting...
-
Page 13: Getting Started
Getting Started Login to XDR Menu To access the OSD keyboard, RIGHT click on mouse. Or use touch screen if utilizing EX4-PGM programmer To connect to the XDR, there are 2 methods Mouse to the USB port on the XDR - Corde - EX4-PGM programming tablet Enter =... -
Page 14: Maintenance - Storage Format
Maintenance – Storage Format 7.3 Maintenance – Storage Format NOTE: Do NOT insert or remove the SD card when the system is powered on, it may cause system error and corrupt recording files XDR uses a proprietary file format, all HDD and SD cards MUST be formatted in the XDR prior to recording. -
Page 15: Vehicle Info
Basic Setup – Register Vehicle / Driver / Device ID Register – Vehicle / Driver / Device Info Note: Save each tab individually before proceeding to next tab throughout the entire programming process Device ID: currently not in use Vehicle Info ... - Page 16 Basic Setup – Date / Time Setup Time setup – Date / Time Note: Save each tab individually before proceeding to next tab throughout the entire programming process Set Date / Time Format Set Time Zone Time Sync - set date and time Enable Satellite time sync via external GPS receiver.
- Page 17 Basic Setup – System Startup Startup – Power On / Off On / Off: How the XDR is activated (3 Modes) - Ignition (Default - Suggested) - Timer - Ignition or Timer Ignition Delay: Time delay between vehicle ignition off to XDR powering off (0-300 seconds) Recommend 5 –...
-
Page 18: User Setup
Basic Setup – User Setup User Setup Idle Time: The length of time the system remains in settings mode before logging out. Recommend (5 or 10 Minutes) User Name: Default admin User Group: It is categorized as Administrator and Normal user Admin: View videos, change settings and export logs User: View videos but cannot change settings or logs Add, Delete or Edit... - Page 19 Output to Monitor Screen Display on monitor View – Preview Note: Save each tab individually before proceeding to next tab throughout the entire programming process Preview Audio: Enable / Disable audio during live view of cameras Image Setup: camera parameters - Color, Contrast, Brightness Margins: Adjust screen display offset to match the monitor...
- Page 20 Surveillance – Record – General / Main Stream 4.3 Surveillance – Record - General Reminder: Save each tab individually before proceeding to next tab This section covers the general system wide setting of the XDR System – PAL / NTSC (Default = NTSC) Overwrite: How the system stores new recording once the storage is full - Capacity: As SD storage is full, system will overwrite oldest data - Date: XDR will overwrite old data based on date...
- Page 21 Surveillance – Record – Main Stream 4.4 Surveillance – Record – Main Stream (Continued) Reminder: Save each tab individually before proceeding to next tab Quality: Video quality in relation to Bit Stream ( 1 – 8, 1 = Best) Default = 3 Record Mode: Select how the camera is activated - Ignition / Power: When vehicle ignition is on - Event: Only when an event occurs...
- Page 22 Record – Main Stream Surveillance – Record – Main Stream (Continued) Reminder: Save each tab individually before proceeding to next tab Quality: Video quality in relation to Bit Stream ( 1 – 8, 1 = Best) Default = 3 Record Mode: Select how the camera is activated - Ignition / Power UP: When vehicle ignition is on (Default) - Event: Only when an event occurs - Time: Active between a set schedule...
- Page 23 Record – Dual Stream Record - Dual Stream Reminder: Save each tab individually before proceeding to next tab This section covers what type of storage is used and the recording method of the 2 SD card (If utilized). Dual Stream is also utilized for continuous recording from 1 card to the 2 card in continuous loop format.
- Page 24 IPC / EX5 HD Camera Setup IPC / HD Camera Setup EX5-HD1 / HD2 NOTE: This section is solely for the configuration, enabling and setting for the EX5-HD series cameras which is a 720P HD resolution IP camera. Each camera has its own internal IP address within the XDR Default IP address for the HD camera = 10.100.100.1 Any IP cameras can start from IP address...
- Page 25 Configuration Configuration File Import / Export If using both corded USB mouse to control and USB thumb drive for NOTE: Firmware storage, a USB hub may be used to provide multiple USB port (Use blank USB flash drive to ensure proper file storage) In the configuration menu, user can export and or import configuration file for system settings.
-
Page 26: Technical Specification
Technical Specification Function Overview Preview, Recording, Playback, Route History Linux 2.6.24 System Control Mode IR remote control 5 channels (1) 720P HD + (4) Analog HD 720P (AHD) or D1 Resolution Input 720 x 30FPS + 4 x 15 FPS Video Output 1 channel... - Page 27 Innovative solutions in vehicle and mobile video technology 1578 W. San Bernardino Rd. # E, Covina, CA. 91722 USA www.ventrainc.com / info@ventrainc.com Tel: 888 418 3833...