Table of Contents
Advertisement
Alarm – Base Configuration
6.0 Alarm – Base – Speed Alarm
Enable / Disable Overspeed Event trigger
Alarm Type: Important or General
Trigger: Set speed limit trigger
- Overspeed Early Warning
If max speed is set at 60 MPH, when vehicle reaches 50 MPH, system will trigger
and activate an alert to optional external device (light, buzzer)
- Speed: Max vehicle speed limit
- Alarm duration ( 0 -255 seconds)
Alarm Linkage:
Channel: XDR supports multiple cameras to be assigned for recording when
specific alarm is triggered
Post Recording: Duration of recording to be marked as post alarm event
Lock: Lock specific alarm recording to keep for specified duration – refer to
section 4.3 General > Surveillance > Record > Lock Duration days 1 – 31 days
3G: Applicable only for the XDR-580H
Linkage Output: 1 or 2 – Enable link alarm output when alarm is triggered
Output delay Time: alarm output duration after alarm is removed 0 – 255 secs
Alarm upload: Enable to upload to platform (Only on XDR-580)
Linkage screen: Link channel to show full image when alarm is triggered
PB alarm duration: Available alarm duration after urgent alarm is removed
Alarm snap: Enable to link image snapshot
34
Advertisement
Table of Contents
