Features Setup Page - PCchips M754 Plus Series User Manual

Mainboard User's Manual

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
OnBoard FDC
OnBoard Serial Port
OnBoard Ir Port
Ir Port Mode
Ir Port IRQ
Ir Port DMA
Ir Transceiver Type
Ir Half-Duplex TimeOut
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA
OnBoard IDE
Ultra DMA Support
OnBoard Sound
OnBoard Modem
OnBoard USB Function
USB Function for DOS
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial Use this item to enable or disable the onboard
COM1 serial port, and to assign a port address
Port
OnBoard Ir Port Use this item to define the protocol for an
infrared port if you have installed an optional IR
port. The choices are IrDA and ASKIR.
Ir Port Mode Use these items to define the settings for an
infrared port if you have installed an optional IR
Ir Port IRQ
port.
Ir Port DMA
Ir Transceiver ...
Ir Half-Duplex ...
OnBoard Parallel Use this item to enable or disable the onboard
Port LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
32
Enabled
3F8h/COM1
Disabled
N/A
N/A
N/A
N/A
N/A
378h
Normal
N/A
7
N/A
Both
Disabled
ESC : Quit
Enabled
F1 : Help
Enabled
F5 : Old Values (Shift)F2
Enabled
F6 : Load Optimal values
Disabled
F7 : Load Best performance values
 : Select Item
PU/PD/+/- : Modify
: Color