Power Management Setup Page - PCchips M754 Plus Series User Manual

Power Management Setup Page

This page sets some of the parameters for system power
management operation.
Power Management/APM Disabled
Standby Time Out Disabled
Suspend Time Out Disabled
Ring On Power On Disabled
RTC Alarm Power On Disabled
RTC Alarm Date Every Day
RTC Alarm Hour 12
RTC Alarm Minute 30
RTC Alarm Second 30
Power Use this item to enable or disable a power
management scheme. If you enable power
Management/APM
management, you can use the items below to
set the power management operation. Both
APM and ACPI are supported.
Standby Time Out This sets the timeout for Standby mode in
minutes. If the time selected passes without any
(Minute)
system activity, the computer will enter power-
saving Standby mode.
Suspend Time Out This sets the timeout for Suspend mode in
minutes. If the time selected passes without any
(Minute)
system activity, the computer will enter power-
saving Suspend mode.
Ring On Power On The system can be turned off with a software
command. If you enable this item, the system
can automatically resume if there is an
incoming call on the Fax/Modem. You must use
an ATX power supply in order to use this
feature.
3: BIOS Setup Utility
 : Select Item
ESC : Quit
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
29